Scx-10.3

ronbeck · 11-14-2020, 11:06 PM

I really like building a lot more than running them! LoL

It’s a stock build with:

Running gear
stainless hardware from KNK
hobby wing fusion esc/motor combo
eco power servo ecp-120t

Dig and 2spd servos on order

Aesthetics
Tamiya bright gun metal paint
Stock wheels/tires

SSD rims on order
And debating on painting the top black on the outside.

Outside of that I’m not sure what’s next. Maybe a new radio, maybe install the interior or maybe I’ll just run it.

justinart24 · 11-17-2020, 01:53 PM

Very cool, welcome back! I been really pondering getting a 10.3, you will tell us how you like it.

322 · 11-18-2020, 08:33 AM

Very nice, I agree with you that building them is sometimes more fun than running them.

Sent from my SM-G965U using Tapatalk

MCE Jason · 11-19-2020, 03:06 PM

That is looking good. I bet the 2 speed and dig are fun to have together. I love 2 speed on my TRX4 and have had dig on Axial, but never together. I miss dig crawling my trail truck TRX4.

ronbeck · 11-22-2020, 10:44 AM

I am going to set the 2spd up and lock out the dig for now.

I need to upgrade from my dxr3 to run both.

I picked up some new wheels and tires over the last two weeks and mounted them today.

Justin The truck is a pig IMO out of the box, but balanced with the new hobbywing motor/esc combo. I guess the trans and axles are all that make it different than a 10.2. But as I run it I’ll keep you updated.

ronbeck · 11-28-2020, 02:26 PM

I ran it outside today and it was surprisingly hooked up. First I ran my OG 10.1 for a bit and then the 10.3. And the 10.3 did everything so easy.

But I don’t know if I will run it hardd enough to know if the portals are a must have.

ronbeck · 01-08-2021, 04:04 PM

A few upgrades pre-christmas and from christmas

ronbeck · 01-08-2021, 04:05 PM

:)
and Christmas goodies

11-17-2020, 01:53 PM	#2
justinart24 MOO! Scaler Join Date: Apr 2009 Location: Lake Stevens Posts: 9,642	Very cool, welcome back! I been really pondering getting a 10.3, you will tell us how you like it. __________________ Facebook Group:https://www.facebook.com/groups/WARCRCGROUP/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-18-2020, 08:33 AM	#3
322 Senior Member Scaler Join Date: Dec 2009 Location: Snohomish Posts: 242	Very nice, I agree with you that building them is sometimes more fun than running them. Sent from my SM-G965U using Tapatalk

11-19-2020, 03:06 PM	#4
MCE Jason Senior Member Crawler & Scaler Join Date: Nov 2014 Location: Bothell WA Posts: 118	That is looking good. I bet the 2 speed and dig are fun to have together. I love 2 speed on my TRX4 and have had dig on Axial, but never together. I miss dig crawling my trail truck TRX4.

11-22-2020, 10:44 AM	#5
ronbeck Senior Member Join Date: Jan 2007 Posts: 2,098	I am going to set the 2spd up and lock out the dig for now. I need to upgrade from my dxr3 to run both. I picked up some new wheels and tires over the last two weeks and mounted them today. Justin The truck is a pig IMO out of the box, but balanced with the new hobbywing motor/esc combo. I guess the trans and axles are all that make it different than a 10.2. But as I run it I’ll keep you updated.

11-28-2020, 02:26 PM	#6
ronbeck Senior Member Join Date: Jan 2007 Posts: 2,098	I ran it outside today and it was surprisingly hooked up. First I ran my OG 10.1 for a bit and then the 10.3. And the 10.3 did everything so easy. But I don’t know if I will run it hardd enough to know if the portals are a must have.